Learn how to Create a Blanket Sew on a Serger, Particularly on a Child Lock

There are a couple of serger manufacturers and fashions on the market which have a particular sew that appears like a blanket sew, however the Child Lock sergers and most fashions you’ll encounter don’t. So, how will you put a pleasant blanket sew round that child receiving blanket you need to make on your coworker’s new child? Or edge that new fleece jacket you’re making for your self? With just a little know-how and a nifty trick utilizing water soluble stabilizer, it’s actually fairly easy.

You’ll solely want two threads, and it’s prettier when you use ornamental threads. I like utilizing 12 weight cotton threads to make a really fairly blanket edging. Make certain your needle is an applicable dimension for the thread you’re utilizing, i.e. utilizing a 90/14 needle with 12 weight cotton thread. Thread your serger for a 2-thread vast flatlock. On a Child Lock serger, you will want to make use of the subsidiary looper, the “swing arm” that blocks the higher looper opening, and you’ll thread your needle thread as if it’s going by way of the higher looper. The thread is not going to go throughout, as you’ll take away it from the tubes, run it by way of the needle guides, and thread the needle as common. Be sure you test your threading diagram that got here together with your serger to see how this completely different threading path works. Thread your decrease looper the identical as you at all times do. Use a sew size of round 3.5 for a 12 weight thread and a width of about 7.5. Your sew size could be modified primarily based on the thickness of your threads, since thicker threads will fill the area extra.

This sew seems nicer when serged over a folded edge of cloth, however it will also be serged on a reduce edge. Lay a 2 inch vast strip of fibrous water soluble stabilizer alongside the sting you’re serging, then serge together with your flatlock sew, working the sting of your cloth simply contained in the blade.

When you find yourself completed, fastidiously pull the water soluble stabilizer towards the sting of your cloth, successfully pulling the loops of the stitches to the sting and inflicting the needle thread stitches to make the bars of the buttonhole sew. Rigorously trim away extra stabilizer after which soak away the remainder.

This system will also be modified to superbly edge your blanket with lace. Align the lace header with the needle notch on the serger presser foot, simply catching the header with the needle as you serge. For this you don’t use water soluble stabilizer. Use the lace to tug the stitches to the sting of the material.

Leave a Comment