DIY Electrical Skateboard ESC Package,10S 36V Electrical Skateboard Controller Longboard + Distant Management Twin Motors ESC Substitute Package


purchase now
$87.99


Learn how to Match the Distant Management with the Controller Board:
1. Join the management board to energy supply.
2. Flip the management board energy on, wait for two seconds. Then press and maintain the swap for about 6 seconds until the ability indication mild glints.
3. Activate the distant management and use a small screwdriver to press the code synchronize swap within the decrease left nook of the distant management.
4. Flip off the distant for two seconds after which flip it on. Await the distant management sign mild and the swap sign mild to flash on the similar time, which signifies that the match is completed.

Specs:
– Title: 4-Wheel Skateboard Longboard Controller Set
– Voltage: 36V, 10S
– Present: 12A
– Velocity: 4200 RPM
– Max. Energy: 430W (36V)
– Drive Mode: Twin System Drive
– Max. Velocity: 35KM/H
– Protections: Over-voltage, Beneath-voltage, Over-temperature, Stall, CW/CCW, Adjustable Velocity
– Sensing Manner: Corridor
– Energy Connector: XT60 Male Plug
– Motor Plug: 4mm Banana Plug
– Max. Load Capability: 120kg
– Distant Distance: as much as 20 meters

Bundle:
1x Distant controller
1x Management panel
Be aware: No Set up Guides Are Included, Skilled utilization is strongly beneficial. We strongly counsel you to ask professor that can assist you to put in this motherboard.
A sine wave scheme makes it work extra secure than the ESC and it’s not simple to burn out
Low velocity however with excessive torque.Max. Load Capability: 120kg
Two-way Communication: You may examine the ability of the skateboard via the distant management
A number of Protections: It options low-voltage alarm perform, under-voltage and power-failure protections.
Match Hub Motor RC Motors: 5055 5065 6354 6364 6374 6384

Leave a Comment