3 Simple Steps to Substitute Your Pachislo Door Lock

The most typical drawback with Pachislo Slot Machines is lacking door keys. In case your secret is lacking or the lock shouldn’t be working correctly, the very first thing you will want to do is entry the within of your machine with out the advantage of a door key.

Upon getting entry to the within of your machine there are 3 ways to unravel the door lock drawback:

1. Discover a matching door key in your machine. This may be tough to do, particularly when you’ve got a machine that’s not widespread.

2. Rig a door opening system. Potential however not simple.

3. Purchase an identical door lock and key, and easily substitute your present door lock.

The simplest factor to do is to switch the whole door lock and key with a brand new set. To do that you will want to take away your previous lock from the machine, measure it and decide which “hook” you will want in your machine. There are a number of sizes of locks and plenty of several types of hooks

Eradicating and Changing Your Present Lock

1. When you entry your machine, look on the within of your door. The most typical kind of lock is held solely with two screws. Take away these two screws and slide the lock out of the door from the within. You may additionally must loosen the screw on the again of the lock to loosen the hook to offer your self some wiggle room to get the lock out.

There are additionally locks which can be held on with a single screw and just one arm and locks which can be soldered onto the 2 latch bars that run the size of the door. This information doesn’t cowl these conditions.

2. As soon as the lock is out, measure the size solely. That’s the solely measurement you will want. Then have a look at the hook finish of the lock. There are MANY several types of hooks. Attempt to match the hook you might have with a lock of the identical size. You will discover locks on-line to match what you want.

3. When your lock arrives insert the hook finish however don’t tighten all the best way. Slide the lock into place, put each screws again in and see the way it suits. There are occasions when it is advisable to flip the lock so what you had as the underside screw would now be the highest screw. When the whole lot strains up and the important thing turns the hook which in turns lifts or lowers the latch bar and opens the door… you might be DONE!

Leave a Comment